Evco EPU2BXP1S1 Manual de usuario descargar pdf (Pagina 58)

EVCO S.p.A. c-pro 3 micro SAVE/ c-pro 3 kilo SAVE | Application Manual ver. 1.0 | Code 144CP3UKSAE104

EVCO

page 58 of 68

AL11 Anti-freeze temperature probe Automatic Inhibits the relevant control Selectable

AL12 Supply air temperature probe Automatic Inhibits the relevant control Selectable

AL13 Return air temperature probe Automatic Inhibits the relevant control Selectable

AL14 CO

probe Automatic Inhibits the relevant control Selectable

AL15 Outdoor intake air temperature probe Automatic Inhibits the relevant control Selectable

AL16 Pressure probe1 Automatic Inhibits the relevant control Selectable

AL17 Pressure probe2 Automatic Inhibits the relevant control Selectable

AL18 Alarm fire/smoke Automatic Inhibits the relevant control Selectable

AL19 RTC alarm failure or unloading Manual

Inhibits the management of the

RTC regulation

(

) These alarms cause the unit to switch OFF (OFF due to alarm status)

(

) To reset the alarms linked to running hours just reset the device hours.

7.3 General alarm relay

The controller manages a configurable alarm relay. For each alarm there is a parameter which selects whether that

alarm must be signalled on the alarm relay. Several alarms can be addressed to the relay.

Via the relevant parameter (PH61) it is possible to establish the polarity (NO, or NC) of the alarm relay.

7.4 Alarms log

The controller record the ALARMS LOG in a non-volatile area of the memory organised as FIFO (First In First Out), that

is a list of the last 100 alarms occurred.

To display the alarms log, select LOG from the General menu or press ESC from the main page to display this page:

Move the cursor on “Show HISTORIAN>>>” and push the Enter key. The alarms log screen will be displayed:

Each element of the log has the following information associated:

- Alarm running number

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

Sin comentarios

Evco EPU2BXP1S1 Manual de usuario Pagina 58