Evco c-pro micro SAVE Manual de usuario descargar pdf (Pagina 30)

C-PRO MICRO SAVE APPLICATION MANUAL

Page 30

Code Parameter description Default Min Max UM Menu Notes

VARIOUS PARAMETERS

PH01 Minimum temperature value -15.0

-20.0

-4.0

PH02

°C

°F

IS-V

PH02 Maximum temperature value 95.0 PH01

110.0

230.0

°C

°F

IS-V

PH03 Minimum CO

probe PPM value 0 0 PH04 ppm IS-V

PH04 Maximum CO

probe PPM value 0 PH03 10000 ppm IS-V

PH05

Enables unit switch-on/off from

“Start/Stop” digital input

Yes (1) No (0) Yes (1) - IS-V

PH06 Enables unit switch-on/off from supervisor No (0) No (0) Yes (1) IS-V

PH18 Cancels the alarms log NO (0) NO (0) YES (1) - IS-V

Set YES (1)

ad wait for

the NO (0)

value to be

read again

PH20 Enable buzzer Yes (1) No (0) Yes (1) - IS-V

PH30

Temperature unit of measurement

0: °Celsius

1: °Fahrenheit

0 (°C) 0 (°C) 1 (°F) - IS-V

PH99 Reset the factory parameters default NO (0) NO (0) YES (1) - IS-D

Wait for the

NO (0)

value to be

read again

on reset

completion

PSd2 Installer level password (2) 0 -999 9999 - IS

Level 3 MANUFACTURER MENU

CONFIGURATION PARAMETERS

After modification of these parameters it is recommended to remove and then re-apply the power supply to the board.

PG01 Enabling of expansion Yes (1) No (0) Yes (1) - CO-G

PG02

Selection of type of device for heating:

0: Disabled

1: Hot water coil only

2: Electric heater coil only

Heaters

(2)

Disabled

(0)

Heaters

(2)

- CO-G

PG03

Type of recovery heat exchanger by-pass

damper control:

0: Digital Control (DO7)

1: Analogue Control (AO3)

DO (0) DO (0) AO (1) - CO-G

PG04 Outside air damper enabling Yes (1) No (0) Yes (1) - CO-G

PG05 Enabling of post-ventilation Yes (1) No (0) Yes (1) - CO-G

PG06

Enabling of recovery heat exchanger anti-

freeze protection

Type 1

(1)

Disabled

(0)

Type 2

(2)

- CO-G

PG08

Enabling of recovery heat exchanger by-pass

in summer

Yes (1) No (0) Yes (1) CO-G

PG09 Activation of outside air damper end run Yes (1) No (0) Yes (1) CO-G

PG10 Type of fan DO (0) DO (0) AO (1) - CO-G

PSd1 User level password (1) 0 -999 9999 - CO-G

PSd2 Installer level password (2) 0 -999 9999 - CO-G

PSd3 Manufacturer level password (3) 0 -999 9999 - CO-G

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 53 54

Comentarios a estos manuales

Sin comentarios

Evco c-pro micro SAVE Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Evco c-pro micro SAVE