Evco EPH4EXP Hardware manual Manual de usuario descargar pdf (Pagina 66)

EVCO S.p.A. c-pro 3 | Hardware manual ver. 3.2 | Codice 114CP3E324

page 66 of 116

Diagnostic Math parameter available in read only modality

Math status

ok = not in error

err = in error (because of overflow,

underflow, division by zero or

NaN)

Diagnostic Key Par parameter available in read only modality

result of the copy of the parameters from the

controller to the programming key EVKEY10

and vice versa

ok = operation successful

completed

err = operazione failed

Debug

[ Algo ]

Main time parameter available in read only modality

main cycle time of the application software

(in milliseconds)

Int. time parameter available in read only modality

interrupt cycle time of the application

software (in milliseconds)

Debug

[ CAN bus ]

rx parameter available in read only modality number of packages in transmission

tx parameter available in read only modality number of packages in reception

Debug

[ CAN bus ]

err parameter available in read only modality number of packages in error

ovf parameter available in read only modality number of packages in overflow

Debug 5VP parameter available in read only modality

reading the power supply voltage of the

ratiometric transducers

Debug 24VP parameter available in read only modality

reading the power supply voltage of the

0-20 mA / 4-20 mA / 0-10 V transducers

Debug

Stack parameter available in read only modality minimum free stack

Buf parameter available in read only modality number of free buffers

Notes:

(1) the submenu is visible on condition that the application software expects the RS-485 port is configured to support the Modbus

communication protocol.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 115 116

Comentarios a estos manuales

Sin comentarios

Evco EPH4EXP Hardware manual Manual de usuario Pagina 66

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Evco EPH4EXP Hardware manual