Evco EPK4LHX Hardware manual Manual de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 44
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
EVCO S.p.A. c-pro 3 NODE kilo | Hardware manual ver. 1.0 | Code 114CP3NKE104
page 25 of 44
Al Err Time 0 240 s 2
analog ports time-out (if no communication with an analog port
is detected after this span of time, the controller notifies an
analog input error)
AO impulse 1 50 ms/10 20 duration of the cut phase impulse
AO1 - - - - - - - - - 0-10V
type of signal analog port 1
FAN
= FAN (for cut phase module)
0-10V
= 0-10 V
PWM
= PWM (Pulse With Modulation)
freq 10 2000 Hz 1000 frequency of the analog port 1 PWM-type signal
delay ph. 0 50 ms/10 0 displacement of the phase-cutting impulse from analog port 1
AO2 - - - - - - - - - 0-10V
type of signal analog port 2
FAN
= FAN (for phase-cutting module)
0-10V
= 0-10 V
PWM
= PWM (Pulse With Modulation)
freq 10 2000 Hz 1000 frequency of the analog port 2 PWM-type signal
delay ph. 0 50 ms/10 0 displacement of the phase-cutting impulse from analog port 2
AO3 - - - - - - - - - 0-10V
type of signal analog port 3
0-20mA
= 0-20 mA
4-20mA
= 4-20 mA
0-10V
= 0-10 V
I/O Timeout
(1)
1 240 s 60
CANBUS communication time-out to check the remote I/O values
(after this span of time has elapsed with no CANBUS
communication, the controller I/O is disabled)
AI1 filter OFF ON - - - ON analog input 1 filter coefficient
AI2 filter OFF ON - - - ON analog input 2 filter coefficient
AI3 filter OFF ON - - - ON analog input 3 filter coefficient
AI4 filter OFF ON - - - ON analog input 4 filter coefficient
AI5 filter OFF ON - - - ON analog input 5 filter coefficient
AI6 filter OFF ON - - - ON analog input 6 filter coefficient
DI1 filter OFF ON - - - ON digital input 1 filter coefficient
DI2 filter OFF ON - - - ON digital input 2 filter coefficient
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Comentarios a estos manuales

Sin comentarios