Evco EPK4BHQ1AH Hardware manual Manual de usuario descargar pdf (Pagina 15)

EVCO S.p.A.

c-pro 3 NODE kilo+ | Hardware manual ver. 1.0 | Code 114CP3NKPE104

page 15 of 55

TECHNICAL

DATA

POWER

Device power supply (24 VAC/DC not insulated)

If the device runs on direct current, it shall be necessary to pay attention to the polarity of the supply voltage.

If the device is connected to a network of devices, it shall be necessary to:

check that the power supply of the devices included in the network are galvanically isolated.

the phase powering the device is the same as that of all the devices included in the network.

PART MEANING

AC/+

device power supply:

if the device is run by alternating current, connect the phase

if the device is run by direct current, connect the positive pole

AC/-

device power supply:

if the device is run by alternating current, connect the neuter

if the device is run by direct current, connect the negative pole

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 54 55

Sin comentarios

Evco EPK4BHQ1AH Hardware manual Manual de usuario Pagina 15