Evco c-pro micro Manual de usuario descargar pdf (Pagina 20)

C-PRO MICRO HARDWARE MANUAL

Page 20

Connector 2: Connector for low voltage signals

Conn. Abbrev. Description

C2-1 12 V AC (Power) Device power supply (12 V AC/DC)

C2-2 Not connected Not connected

C2-3 GND Common analogue and digital inputs

C2-4 GND Common analogue and digital inputs

C2-5 AI4 Analogue input No. 4 (for NTC probes or for 0/4-20 mA or 0-5 V

transducers)

C2-6 AI3 Analogue input No. 3 (for NTC probes or for 0/4-20 mA or 0-5 V

transducers)

C2-7 AI2 Analogue input No. 2 (for NTC probes)

C2-8 AI1 Analogue input No. 1 (for NTC probes)

C2-9 12 V AC (Power) Device power supply (12 V AC/DC)

C2-10 12 V DC Current transducer and cut-off module power supply (50 mA max.

not protected against short circuits)

C2-11 AO1 Cut-off module impulse output

C2-12 DI5 Digital input No. 5

C2-13 DI4 Digital input No. 4

C2-14 DI3 Digital input No. 3

C2-15 DI2 Digital input No. 2

C2-16 DI1 Digital input No. 1

Connector 3: Connector to the controller

Conn. Abbrev. Description

C3-1 12 V DC Power supply

C3-2 GND Common

C3-3 DATA Powered serial connection

Connector 3: Connector to the controller

Conn. Abbrev. Description

C3-1 CAN + Connector for the serial CAN + connection

C3-2 GND Ground reference connector

C3-3 CAN - Connector for the serial CAN - connection

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Sin comentarios

Evco c-pro micro Manual de usuario Pagina 20