Evco EVF328J9 Manual de usuario Pagina 31

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 62
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 30
EVCO S.p.A. EVF 300 series | Installer manual ver. 1.1 | Code 144F300E114
Page 31 of 62
14 CONFIGURATION
14.1 Setting the day of the week and
the time
The day of the week is displayed in the 1...7 format (number 1
corresponds to Monday);the time is displayed in the 24 h
format (hours:minutes).
Operate as follows to set the day of the week:
1. Make sure there is no cooking cycle or any
procedure in progress.
2. Hold the “CLOCK” key down for 1 s: the “CLOCK
LED will switch on and the bottom part of the
“UPPER” display will show the day of the week and
the time; the day of the week value will flash.
3. Press and release the UP or DOWN key within 15 s
to set the value of the day.
Operate as follows to set the hours:
4. Press and release the “CLOCKkey while setting
the day of the week: the hours value will flash.
5. Press and release the UP or DOWN key within 15 s
to set the value of the hours.
Operate as follows to set the minutes:
6. Press and release the “CLOCKkey while setting
the hours: the minutes value will flash.
7. Press and release the UP or DOWN key within 15 s
to set the value of the minutes.
Operate as follows to exit the procedure:
8. Press and release the “CLOCKkey while setting
the minutes: the “CLOCK” LED will switch off and
then the device will exit the procedure.
Operate as follows to exit the procedure before the operation
is complete:
9. Do not operate for 15 sec (any changes will be
saved).
Setting the day of the week and the time
Vista de pagina 30
1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 61 62

Comentarios a estos manuales

Sin comentarios