Evco EK825AP7 Manual de usuario descargar pdf (Pagina 10)

PROCEDURE OF CONFIGURATION PARAMETERS PROGRAMMING

The configuration parameters programming can be done during the status "STOP" only, if there is not a corrupted memory data alarm.

There are two Levels of configuration (Level 2 is protected by password):

Level 1

Keep pushed T 8 and T 9 at the same time for 4 seconds at least: on the indicator DY 1 appear the

parameter "PA".

Push T 8 or T 9 to select the parameter to modify at Level 1.

Keep pushed T 10 and T 8 or T 9 to modify the selected parameter: after the modify release the key T 10 as last.

Level 2

From Level 1 push T 8 or T 9 to select the parameter "PA".

Keep pushed T 10 and T 8 or T 9 to set "-19": after the modify release the key T 10 as last.

Keep pushed T 8 and T 9 at the same time for 4 seconds at least: on the indicator DY 1 appear the first

parameter of Level 2.

Push T 8 or T 9 to select the parameter to modify at Level 2.

Keep pushed T 10 and T 8 or T 9 to modify the selected parameter: after the modify release the key T 10 as last.

How to leave the PROCEDURE

Keep pushed T 8 and T 9 at the same time for 4 seconds at least or wait 50 seconds without operate on

the keyboard (time-out exit) or stop and restart the instrument after about 1

second from the last modify.

1 2 ... 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Evco EK825AP7 Manual de usuario Pagina 10