Evco EPV4TBR Hardware manual Manual de usuario descargar pdf (Pagina 9)

Evco S.p.A. Vtouch | Hardware manual ver. 1.01 | Code 114VTOUHWE01

page 9 of 22

The maximum length of the connecting cables of the power supply is 10 m (32.8 ft).

In the models with not isolated power supply, this must galvanically be isolated from the one of the other devices connected in the

network.

3.2. Additional information for electrical connection

- do not operate on the terminal blocks with electrical or pneumatic screwers

- if the interface has been moved from a cold location to a warm one, the humidity could condense on the inside; wait about an hour before

supplying it

- test the working power supply voltage, working electrical frequency and working electrical power of the interface; they must correspond

with the local power supply

- disconnect the local power supply before servicing the interface

- do not use the interface as safety device

- for repairs and information on the interface please contact Evco sales network.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Sin comentarios

Evco EPV4TBR Hardware manual Manual de usuario Pagina 9