Evco PR100AX9S001 Manual de usuario descargar pdf (Pagina 5)

Every Control S.r.l. • PR 100A • Sheet 3/3

8 CONFIGURATION PARAMETERS

8.1 “User” level parameters (password -19)

LABEL MIN. MAX. U.M. DEF. PASSWORD

Password -99 99 --- 0 password

LABEL MIN. MAX. U.M. DEF. PRINT OF THE INSTRUMENT SET UP

Print Setup? Yes No --- No print of the instrument set up

(4)

LABEL MIN. MAX. U.M. DEF. PRINTING MODE

Off Line Yes No --- No printing mode (Yes = Daily Report and Historical Report, No = On Line Report)

(5)

Remote Print Yes No --- No enabling of the input for remote print during the Historical Report printing

mode (it is important if Off Line = Yes)

Print Hour Off 23 h 8 printing time by using the Daily Report printing mode (it is important if

Off Line = Yes; Off = the instrument will never print the data)

8.2 “Installer” level parameters (password 19)

LABEL MIN. MAX. U.M. DEF. PASSWORD

Password -99 99 --- 0 password

LABEL MIN. MAX. U.M. DEF. PRINT OF THE INSTRUMENT SET UP

Print Setup? Yes No --- No print of the instrument set up

(4)

LABEL MIN. MAX. U.M. DEF. GENERIC SETTINGS

Celsius/Fahr. °C °F --- °C temperature unit of measure (it is important if AN1...6 Type ≠ 4-20 mA)

Acq. Time 1 360 min 15 acquisition time

Day Setup 1 31 day 1 real day

Month Setup 1 12 month 1 real month

Year Setup 1990 2050 year 2001 real year

Hour Setup 0 23 h 0 real hour

Min Setup 0 59 min 0 real minute

LABEL MIN. MAX. U.M. DEF. PRINTING MODE

Off Line Yes No --- No printing mode (Yes = Daily Report and Historical Report, No = On Line Report)

(5)

Remote Print Yes No --- No enabling of the Historical Report printing mode (it is important if

Off Line = Yes)

Timeout Setup 5 100 s 10 time without you operate with the keys in order that the instrument can quit

the configuration parameters setting procedure

Print Hour Off 23 h 8 printing time by using the Daily Report printing mode (it is important if

Off Line = Yes; the instrument will never print the data)

AN4 4-20mA Type --- --- --- %RH 4-20 mA unit of measure (it is important if AN4 Type = 4-20 mA;

RH% = percentage of relative humidity, bar = bar, °C = Celsius degree,

°F = Fahrenheit degree, Hz = hertz, mA = milliampere, - = dimensionless)

(13)

AN4 4-20mA Min -99 999 points 0 minimum value of the range of the transducer 4 (it is important if

AN4 Type = 4-20 mA)

(13)

AN4 4-20mA Max -99 999 points 100 maximum value of the range of the transducer 4 (it is important if

AN4 Type = 4-20 mA)

(13)

AN4 dec. point 0 2 --- 0 decimal point position (it is important if AN4 Type = 4-20 mA;

0 = it will never be showed, 1 = ten, 2 = hundred)

(13)

LABEL MIN. MAX. U.M. DEF. MEASURE INPUT 5

AN5 Type --- --- --- PTC kind of probe 5 (PTC, TC J, TC K, NTC, 4-20mA, PT 100)

(15)

AN5 Alarm Setup --- --- --- No kind of alarm (No = it will never be activated, AL = lower alarm,

AH = upper alarm, AH & AL = both the upper alarm and the lower one)

(15)

AN5 Max Alarm -99 999

(16)

70 upper alarm threshold (it is important if AN5 Alarm Setup = AH or AH & AL)

(15)

AN5 Min Alarm -99 999

(16)

10 lower alarm threshold (it is important if AN5 Alarm Setup = AL or AH & AL)

(15)

AN5 Alarm Hyst 120

(16)

2 hysteresis (differential, it is relative to AN5 Max Alarm and AN5 Min Alarm,

it is important if AN5 Alarm Setup ≠ No)

(15)

AN5 Offset -20 20

(16)

0 probe 5 calibration

(15)

AN5 4-20mA Type --- --- --- %RH 4-20 mA unit of measure (it is important if AN5 Type = 4-20 mA;

RH% = percentage of relative humidity, bar = bar, °C = Celsius degree,

°F = Fahrenheit degree, Hz = hertz, mA = milliampere, - = dimensionless)

(15)

AN5 4-20mA Min -99 999 points 0 minimum value of the range of the transducer 5 (it is important if

AN5 Type = 4-20 mA)

(15)

AN5 4-20mA Max -99 999 points 100 maximum value of the range of the transducer 5 (it is important if

AN5 Type = 4-20 mA)

(15)

AN5 dec. point 0 2 --- 0 decimal point position (it is important if AN5 Type = 4-20 mA;

0 = it will never be showed, 1 = ten, 2 = hundred)

(15)

LABEL MIN. MAX. U.M. DEF. MEASURE INPUT 6

AN6 Type --- --- --- PTC kind of probe 6 (PTC, TC J, TC K, NTC, 4-20mA, PT 100)

(17)

AN6 Alarm Setup --- --- --- No kind of alarm (No = it will never be activated, AL = lower alarm,

AH = upper alarm, AH & AL = both the upper alarm and the lower one)

(17)

AN6 Max Alarm -99 999

(18)

70 upper alarm threshold (it is important if AN6 Alarm Setup = AH or AH & AL)

(17)

AN6 Min Alarm -99 999

(18)

10 lower alarm threshold (it is important if AN6 Alarm Setup = AL or AH & AL)

(17)

AN6 Alarm Hyst 120

(18)

2 hysteresis (differential, it is relative to AN6 Max Alarm and AN6 Min Alarm,

it is important if AN6 Alarm Setup ≠ No)

(17)

AN6 Offset -20 20

(18)

0 probe 6 calibration

(17)

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios

Evco PR100AX9S001 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Evco PR100AX9S001