Evco EK340AJ7 Manual de usuario descargar pdf (Pagina 2)

CODE

corrupted

memory

data

alarm

chamber

probe

alarm

• press and for 4 s : the instrument

will show

To quit the procedure:

• press

and for 4 s or do not oper-

ate for about 60 s.

6 SIGNALS

6.1 Signals

7 ALARMS

7.1 Alarms

LED

° C

°F

MEANING

LED regulator

if it is lit, the temperature the chamber probe is reading is below the

working setpoint

LED top and floor

if they are lit, the top output and the floor output will be turned ON

LED quick heating

if it is lit, function Quick heating will be activated

LED chamber light

if it is lit, the chamber light will be lit

LED Celsius degree

if it is lit, the unit of measure of the temperature showed by the instru-

ment will be Celsius degree

LED Fahrenheit degree

if it is lit, the unit of measure of the temperature showed by the instru-

ment will be Fahrenheit degree

LED ON STAND-BY

if it is lit, the instrument will be in the STAND-BY mode (turned OFF)

top heating group:

• press

• press or within 4 s

(3)

• press

The time the top output is turned ON is “ {[(time you have set

with parameter c1) / 10} x (number of bars turned ON in the LED

bar at the top) “

(4)

To modify the value of the percentage of power supplied to the

floor heating group:

• press

during the modification of

the percentage of power

supplied to the top heat-

ing group

• press

or within 4 s

(3)

• press

The time the floor output is turned ON is “ {[(time you have set

with parameter c1) / 10} x (number of bars turned ON in the LED

bar at the bottom) “

(4)

(3) if parameter c0 has value 1, the modification of the percentage of power

supplied to a heating group will automatically provoke the supply of the maxi-

mum power to the other one and vice versa; if parameter c0 has value 2, the

modification of the percentage of power supplied to a heating group will auto-

matically provoke an adjustment of the other one such as to guarantee that the

sum of bars turned ON will always be 10

(4) the outputs are turned ON as much as possible alternatively.

5 CONFIGURATION PARAMETERS

5.1 How to set configuration parameters

Configuration parameters are arranged on two levels.

To gain access the first level:

• press

and for 4 s : the instrument

will show

To select a parameter:

• press

To modify the value of the parameter:

• press

and or

To gain access the second level:

• gain access the first level

• press

or to select

• press and or to select “ -19 “

REASONS

there is a corruption of

the configuration data

in the memory of the

instrument

• the kind of chamber

probe you have con-

nected is not right

REMEDIES

turn OFF the power

supply of the instru-

ment: unless the alarm

disappears, you will

have to change the

instrument

• look at parameter

• test the integrity of

the probe

EFFECTS

• the access to the

setting procedures

will not be allowed

• all outputs will be

turned OFF

• the top output will

be turned OFF

• the floor output will

be turned OFF

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Evco EK340AJ7 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Evco EK340AJ7